Electric sprayer for water-based stucco base, finish coat materials, and Exterior Insulation and Finish Systems (EIFS). For professional use only.
| HVBAN EP3225 Sprayer Technical Specification | |
| Maximum fluid working pressure | 6 Mpa(60 bar,870psi) |
| Maximum Delivery | 28.9 L/min |
| Flow Control | Adjustable |
| Stroke length | 58.5 mm |
| Maximum pump speed(Do not exceed maximum recommended speed of fluid pump to pervent premature pump wear) |
150 cycles pre minute |
| Weight(dry) | 95 kg |
| Wetted Parts | Stainless steel, plated steel, carbide, urethane PTFE,UHMWPE, LLDPE,aluminum, neoprene |
| Fluid inlet size | 76 cm |
| Fluid outlet size | 1 in |
| Maximum viscosity | 10000 cps |
| Environment temperature range | 4-49° |
| Minimum fluid temperature | 4° |
| Motor size | 5.3HP |
| 220V models | 220V,three-phase,50/60HZ |
| Minimum pressure | 4Mpa,40bar |
| Minimum hose diameter | 2.5 cm |
| Minimun hose length | 7.6 m |
| Hopper Capacity | 51 L |
Portable sprayer suitable for mortar, cement and large quantities of filling materials.
A convenient alternative to manual plastering.
Manual plastering of cementing material is time consuming. With the HVBAN EP3225 Sprayer, you can save time, speed up construction, and increase profits by using spray plastering instead of traditional pallet and spatula methods.
The EP3225 is designed to tolerate coarse sand materials and is easy to use and clean. When cleaning the pump, it usually only needs to be washed at high speed to prevent accumulation in the line.
EP3225 is a better alternative to manual plastering.
Advantages:
Save labor cost
Reduce material waste and improve spraying quality
Cleaning is quick and easy
The structure is stable and durable
Suitable for paint contractors
Compact, compact and portable
Easy to move – only 95kg
Materials and Applications:
Epoxy mortar
Anti-skid coating
Cementing coatings and fire protection
Surface repair material
waterproof
A polymer containing glass scales, silicon, and sand fillers
Water and wastewater treatment plants
Main Features:
Reduced material waste and a more consistent finish than manual plastering
Clean quickly and simply with a high speed rinse
Can be quickly removed for manual cleaning
Convenient air source for running pumps and atomizing air
